Complete

No. It is a DIY-class install that uses a patented non-contact sensor. It straps to the outside of the AC conduit or sits near the main fuse. The sensor detects the magnetic field from the current flow and the optical reader captures pulses from the utility meter to maintain utility-grade sync.

Powersensor supports single, two, and three-phase solutions. For 3-phase, the "Home Sensor" uses an optical reader to track total consumption from the meter, while the "Solar Sensor" monitors the inverter output. Note that sites with multiple inverters or complex battery setups may require specific sensor placement or may have compatibility limitations (important for professional site auditing).

Within 5% of the utility meter. The system uses a 48-hour "Learning Process" (Fast Learning Mode). It requires a "reference point" (the WiFi plug) to calibrate the sensors against known loads. This removes the need for manual calibration or expensive CT clamps.

The system uses a hybrid of Bluetooth (BLE) and WiFi. The sensors communicate via BLE to the WiFi Plug (Gateway), which then pushes data to the cloud. Recommended range is within 1–2 rooms (approx. 10m) of the plug. This is a critical FAQ for installers to ensure they place the WiFi plug in the optimal location during setup.

Yes, using the "Hardwired Appliance" sensor or additional WiFi plugs. The sensors can be "trained" to recognize the signature of specific hardwired appliances by monitoring the AC supply cable/conduit. This allows the energy solution provider to offer a "deep dive" into a client's energy waste.

Powersensor uses a secure, Australian-based cloud infrastructure. Data is sampled at 30-second intervals, providing high-resolution "spiky" data that helps in identifying appliance starts/stops, which is more granular than many utility smart meters.

Download the Powersensor app, create your account, and follow the guided setup. You’ll plug in the WiFi Plug, place the sensors, and connect everything through the app.

The WiFi Plug measures the energy usage of a connected appliance to help calibrate the system. This allows the platform to deliver accurate, whole-of-home energy insights.

Sensors are placed near your main electrical supply and, if applicable, your solar inverter. LED indicators help guide correct positioning. No tools or wiring are required.

You can check the sensor’s LED signal and view live data in the app to confirm everything is set up correctly.

Yes. You can add additional WiFi Plugs or sensors to monitor appliances like EV chargers, hot water systems, air conditioning, and pool pumps.

You can access installation videos and Help Centre guides via the app at any time for step-by-step support and troubleshooting.

You can watch the full installation video or follow the detailed step-by-step guide in the app.